Instalation

A cameras installation requires a low voltage supply. The cameras can operate independently recording images to an onboard sdd memory card. However to gain remote access to the cameras they will need to connect to a router. This connection if a short distance appox 20 meters can be with Wifi, but if the distance if further than this or obstructed by buildings an Ethernet cable will need to be run from the camera to the router..


Tilt & Turn

:-  Power Supply  


Ethernet Cable

:-  Network Cable  

Internal/External

Internal cameras offer the flexibility of being able to tilt & turn but must be kept dry. They can be installed in sheltered outdoor locations such as under canopy's or under arches where they wont get wet. The External cameras on the other hand are in a fixed position so are more suited to locations such as driveways.



Tilt & Turn

:-  Internal  


Ethernet Cable

:-  Outdoor Installation